Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

Zerogra Double Handle IV (Circle Limited)

$127.00 $63.50

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services
SKU:
Categories :
  • Reel > Spin > Handle
  • Handle pitch (width) 65mm
    Weight (approx.) Daiwa compatible 12.1g
    Shimano compatible 12.6g
    Handle material Extra super duralumin
    Knob type Acrylic knob

    ZEROGRA double handle + balancer IV modified

    This time, I changed the ZEROGRA Double Handle IV knob from 8.00mm to 9.90mm.

    By making it 1.9mm thicker, it is easier to grip.

    It can powerfully handle unexpected large prey, and is less tiring to use for long periods of time.

    The material used is the same acrylic as before.

    The big advantage of acrylic is that it is light and hard. Hardness naturally improves sensitivity.

    The plates and shafts are machined from ultra-super duralumin, and every last detail has been hollowed out.

    The result was excellent.

    Circle-exclusive colors: Majora Pink Black

    Handle pitch (width): 65mm

    Weight (approx.): Daiwa compatible 12.1g, Shimano compatible 12.6g

    Handle material: Super duralumin

    Knob Type: Acrylic knob

    Special tool included If the knob nut becomes loose, please use the special tool provided.

    It is possible to tighten it with a hex wrench, but please be careful not to overtighten it as this may result in damage.

    Precautions for use: The handle is a very delicate product.

    There is no problem with its strength under normal use, but if it is dropped or hit, the handle may bend or the knob may crack. Please handle with care.

    This knob is thin and does not have centrifugal force, so at first glance it may seem difficult to turn, but this does not affect its use in any way.

    Please attach the plastic skirt with the top side (knob side) raised. After attaching, lower it to a position where it does not hit the reel to prevent foreign objects from entering.

    If you attach it in the lowered position, the skirt will come into contact with the reel and the handle will not turn.

    Please be careful as this may result in damage to the skirt.

    The screws may come loose during use, so we recommend tightening the three outer screws (2 handle knobs, center screw) approximately once every 2-3 months (the knob screws can be tightened with the included special tool).

    The center nut can be tightened with a 4mm hex wrench. Please be careful not to overtighten it, as this may damage it.

    [34 Staff Introduction]
    34 Instructor: YonemotoInstagramis here
    34 Instructor: TaikiInstagramis here
    34 Instructor: HiroInstagramis here

    Add a Review

    Your email address will not be published. Required fields are marked *